• 09 570 8999
  • 0800 100 098
  • Shop Open: Monday - Thursday 9:00am - 4:00pm
  • Friday 9:00am - 2:00pm
  • Saturday 9:30am - 1:30pm
  • Anzac Day: Closed Monday 27 April
Instagram

Product

Vacuum Bagging Film - 50 Micron
Vacuum Bagging Film – 50 Micron

Price range: $6.00 through $440.00 incl GST

SKU VAC.BAG.50MICRON.1.52M Category

50 Micron Vacuum Bagging Film

Pack Type: Per Metre | 10m Pack | Full Roll (100m Long)
Available Film Widths: 1.4m | 1.52m

_
Vacuum bagging film is used to wrap and seal a composite job so air can be removed with a vacuum pump. This pressure helps squeeze excess air out and hold everything firmly in place while the resin cures.  This film is strong and stretches easily, it works well for both resin infusion and everyday vacuum bagging work.

–

Features:

  • Lightweight 50 micron thickness film is lighter and more flexible than thicker options.
  • Stretches very easily, making it ideal for smaller parts, simple shapes, and applications where maximum drape is needed.
  • Suitable for both resin infusion and general vacuum bagging, particularly where puncture risk is low.
  • Multilayered co-extruded vacuum bagging film with excellent resistance to polyester and epoxy resins

–

Technical Snapshot:

  • Thickness: 50 Micron
  • Colour: Yellow
  • Max Use Temp: 150C
  • Tensile strength: 40MPa
  • Elongation: 400%
  • Brand: LeadgoTech

–

Quick Tips:

  • Allow sufficient slack in the film to enable stretch under vacuum without bridging.
  • Avoid sharp edges or corners under the bag to reduce puncture risk.
  • Use sealant tape to seal edges of the film.
  • For larger parts or higher puncture risk, consider using 75 micron vacuum bagging film instead.

–

A few words on safety:

  • Not usually considered unsafe on its own.

_

Got questions? Drop by our Fibreglass Shop or give us a call.