Our Silicone kit is what you need for your next moulding project.

Key Info:

• 1:1 mix by hand or using a low speed electric mixer
  • Use a tall mixing device because this product expands to 3-4 times its volume until the product degasses
• Working time 11-13 minutes
  • Pot life: 4 minutes, @23C, 50% Relative Humidity
  • Demoulding time: 35 minutes, @23C, 50% Relative Humidity
  • Mix Viscosity:  7000mPa, @ 23C
    • Higher temperatures reduce pot life and lower temperatures increase it.
• Platinum Cured
• Made in UK

–

Available in:

• 1kg
  • 500G Part A
  • 500G Part B
• 2kg
  • 1KG Part A
  • 1KG Part B
• 10kg
  • 5KG Part A
  • 5KG Part B

• 50kg
  • 25KG Part A
  • 25KG Part B

–

Additional info:

• Hardness Shore A:  20 (Standard: ASTM D2240)
• Tensile Strength at break: 4mPa (Standard: ASTM D412)
• Elongation at break: 500% (Standard: ASTM D412)
• Tear strength: 15KN/m (Standard: ASTM D624)
• Linear Shrinkage: <0.2%