Resin Infusion Starter Kit

Sizes: N/A
Pack Type: Starter Kit With Knitted Mesh | Starter Kit With Extruded Mesh

—

A practical starter kit with the essentials you need to  to get started with resin infusion in one convenient pack.  Just add resin, reinforcements and a vacuum pump to have everything you need to get your next project under way.

—

Kit contents:

• 1 X Catchpot
• 2 X Silicone Connectors
• 2 X 12mm Line Clamps
• 1m X 8mm ID Vacuum Hose
• 5m X 1.4m Wide 50 Micron Vacuum Bagging Film
• 3m X 1m Wide Peel Ply
• 1.5m X 2.3m Wide Knitted Infusion Mesh Or 3m X 1.2m Wide Extruded Infusion Mesh
• 1 X 16m Sealant Tape Roll
• 10m X 10mm Spiral Tubing

—

Features:

• Option of knitted or extruded mesh
  • knitted will conform around small parts and curves
  • extruded works better for flat parts and panels
• Position spiral tubing to promote resin flow across the part

—

Quick Tips:

• Typical stack order: laminate, peel ply, infusion mesh, vacuum bag film.
• Position spiral tubing to promote resin flow across the part
• Check for leaks before mixing resin

—

Technical Snapshot:

• Material:
• Brand: NZ Fibreglass

—

A few words on safety:

• Use in well ventilated area with the right PPE including gloves, eye protection and mask.

—

Got questions? Drop by our Fibreglass Shop or give us a call.