A hard acrylic polymer designed for a variety of uses including: boat and patio decks, steps, concrete and fibrolite decks, ramps, pool surrounds and other wet areas.

–

Key Info:

• Effective non-slip coating.
• Made in NZ for NZ conditions
• Coverage:
  • ~ 1L will cover 2 square metres
• Appearance
  • Gloss
• Drying Time
  • 20C
    • Touch Dry: 1 Hour
    • Handle Dry: 2 Hours
    • Full Cure: 8 Hours
  • 10C
    • Touch Dry: 2 Hour
    • Handle Dry: 4 Hours
    • Full Cure: 16 Hours
• Available in:
  • White and Pastel Grey
    • Other colours available but lead time is 3-5 days
  • 1L or 4L pack size
• Comes with roller
  • This is the best roller to use for this product

–

Additional Info:

• Apply with brush, roller or airless spray.
• You can overcoat with polyurethane glaze where additional ease of clean is required
  • One pack or two pack glaze is ok
  • Care must be taken to ensure that the addition of the glaze film does not reduce the Don’t Slip effect.
  • Not suitable for vehicular traffic
  • Product comes with special roller