Mould Release Wax is easy to apply and remove.  One tin will provide hundreds of releases when used in small to medium sized moulds.

–

Key Info:

• 397g Tin
• Paste Wax
• Can be used with PVA release wax
• Can be used with epoxy resin, Polyester resin or vinyl ester resin
• Dry Time: 5- 10 minutes at 20C
• Polishes to a high gloss finish without streaking
• Reduces wax build-up and styrene accumulation

–

Available in:

• Regular
  • TR102
  • Dry Time: 5-10 minutes@ 20°C.
    • Varies depending on working temperature
  • Specific Gravity: .80-.82
  • Wax Melting or Softening Point: 85 – 93°C
  • Color: Off-white
• Hi Temp
  • TR104
  • Dry Time: 5-10 minutes @ 720 F.
    • Will vary depending on working temperature.
  • Melt Points: 82 – 98°C
  • Penetration Hardness: 1 at 250 C (Carnauba Wax)
  • Color: Light blue tint. Color-coded for identification

–

How to Use:

Apply to mould surface in a circular motion using a clean cloth.

Allow to haze dry for 5-10 minutes.

Lightly polish to smooth out wax surface.

Repeat 3-5 times before applying resin.

–

** Similar products are Stoner #8 Miracle Gloss and Honey Wax release agents.

–

Additional Info:

A high production paste wax mould release with excellent breakdown characteristics for fast, even coverage.

A firm carnauba based mould release paste wax blended with other synthetic waxes for use in various thermo-set composite molding applications.