Mould Release Paste Wax – TR Range

–

–

Features:

• High‑performance paste mould release waxes
• Easy to apply and polish
• Produces a hard, high‑gloss release film
• Reduces wax build‑up and styrene accumulation

–

Technical Snapshot:

• TR102 – Regular:
  • Dry time: 5–10 minutes at 20 °C (varies with conditions)
  • Melting / softening point: 85–93 °C
  • Colour: Off‑white
• TR104 – High Temp:
  • Dry time: 5–10 minutes at 20 °C (varies with conditions)
  • Melting / softening point: 82–98 °C
  • Colour: Light blue tint
• TR108 – Sealer / Mould Break In
  • Dry time: 5–10 minutes at 20 °C (varies with conditions)
  • Melting / softening point: approx. 85 °C
  • Colour: Yellow / brown
  • Silicone‑free formulation
  • Works well with PVA Release Agent

–

Quick Tips

• Apply a thin, even coat to a clean, dry mould surface using a clean cloth or sponge
• Work in a circular motion over small overlapping areas
• Allow to haze for 5–10 minutes
• Buff lightly to a smooth gloss finish
• Repeat 3-5 times before applying resin

–

Additional Info:

• TR108 is ideal for first‑time mould preparation or fisheye issue
• TR102 is best for day‑to‑day production work
• TR104 should be used where moulds or laminates run hot

–

A few words on safety:

—

Got questions? Drop by our Fibreglass Shop or give us a call.