Flowcoat – Grey

Sizes: 500g | 1kg | 4kg | 20kg
Pack Type: 2 Pack – Flowcoat and MEKP

—

Flowcoat is used as a finishing coat on fibreglass laminates leaving a nice finish that cures hard and smooth.    It works well for repairs, resurfacing and protective coatings.

—

Features:

• Colour is RAL 7045 Telegray
• Brushing grade for easy application with a brush or roller
• Excellent flow and levelling properties
• Waxed so cures to a hard water resistant finish with high gloss retention

—

Quick Tips:

• Stir flowcoat with a mixing stick before use
• Apply with roller or brush to 0.5mm-0.7mm thick. Use a wet film gauge for accuracy.
• Let the flowcoat “flow” on, do not press down hard on the roller or brush like you are painting

—

Technical Snapshot:

• Material: Polyester and MEKP
• Coverage @ 0.7mm (2 Coats): 700g covers 1m2
• Recommended wet-film thickness: 20-28 thou (0.5mm-0.7mm)
• Working Temperature: 18C-25C
• Geltime @ 25C: 14-22mins
• Mix Ratio: 100:2 by weight (2% MEKP)
• Brand: Synthepol

—

A few words on safety:

• Use in well ventilated area with the right PPE including gloves, eye protection and mask.
• Full SDS available upon request.

—

Things our customers have used this for:

• inside of anchor lockers
• inside of hull

—

Got questions? Drop by our Fibreglass Shop or give us a call.