Our everyday epoxy resin is marine grade, solvent free and made in New Zealand.  Use for making and repairing boats, boat parts and car parts.

–

Key Info:

• 4:1 mix by volume
• Pack contains Epoxy Resin and Hardener
• Marine Grade
  • Can be combined with epoxy Glue Powder to form high strength epoxy glue
  • Can be combined with epoxy Fairing Powder to form an epoxy fairing compound
• Low viscosity, high functionality, for superior wet out on timber, glass and exotic cloths
• Low diluent levels in the resin ensure superior cured strengths
• Working time:
  • 25 minutes @18C
• Full cure:
  • 6-24 hours depending on ambient temperature
• Cure colour: light yellow

–

Available in four sizes:

• 625ml pack
• 1.25ml pack
• 5L pack
• 20L pack

• Use our Clear Epoxy if you want a clear finish
• If mixed by weight it is ratio is 4.4:1
  • We recommend that this product is mixed by volume
• Can be used for:
  • Timber, steel, aluminium and GRP boat building
  • Osmosis repair and barrier coating below the waterline
• When combined will filler powders can be used as:
  • A construction epoxy glue
  • Marine and construction coving (filleting) hole and gap filling

–

Quick Use Guide:

1. Use safety equipment
2. Prepare surface
3. Apply with clean tools
4. Measure Part A and Part B by volume.
   • FOUR parts Epoxy Resin to ONE part Epoxy Hardener.
   • Combine Part A and Part B.
5. Mix for 3-4 minutes, scraping the sides and bottom until you have no streaks and the two parts are well combined
6. Allow all bubbles to rise to surface – around 30 seconds. Use immediately.
7. Apply immediately to the clean, prepared substrate
8. The thin film cure is dependent on the ambient temperature and could take 6 – 24 hours