Mixing pumps take the guess work out of mixing your epoxy.

–

Key Info:

• These pumps are made for the NZ Fibreglass, Epiglass and any other 4:1 mix epoxy products
• Calibrated for 4:1 mix
  • 27.5ml per pump – Resin Pump
  • 6.8ml per pump – Hardener Pump
  • Total 34.3ml per mix
  • Note: The correct mixing formula is one pump of each
• Pack contains:
  • 1 x Resin Pump and
  • 1 x Hardener Pump

–

Available in:

• One size
  • these pumps will work with our 5L and 20L epoxy resin packs
  • we will provide a length of hose if this is ordered with the 20L Epoxy Resin Pack so that this pump can reach the epoxy at the bottom of the container

–

Additional Info:

These pumps fit the 20L and 5L Epoxy Resin Packs:

• You will need to drill a small hole in the lid of the 16L container to set the pump in
• You should always tape off these pumps when not in use as epoxy hardener will oxidise in the air (turn yellow and crusty)