• 09 570 8999
  • 0800 100 098
  • Shop Open: Monday - Thursday 9:00am - 4:00pm
  • Friday 9:00am - 2:00pm
  • Saturday 9:30am - 1:30pm
  • Anzac Day: Closed Monday 27 April
Instagram

Product

Epoxy Bog
Epoxy Bog

Price range: $28.00 through $225.00 incl GST

SKU EPOXY.BOG Categories ,

Epoxy Fairing Cream – EpoxyBog

Pack Type: 2 Pack
Sizes: 500ml | 1L | 2L | 4L | 8L | 20L

Our Epoxy Bog is a lightweight fairing filler that spreads smoothly, holds its shape, and sands beautifully.  It bonds to timber, steel, aluminium, fibreglass, and composite surfaces, delivering a smooth, durable finish for marine and general‑purpose applications.
–
Key Info:
  • Easy to sand once cured
  • Suitable for large and small areas
  • Retains a feather edge
  • Low Silica content
  • Non‑shrink / non‑slump formulation
  • Excellent for filleting and coving
  • Low shrinkage and low exotherm
  • Water‑repellent, can be used below the waterline when over‑coated with pure epoxy
  • Applies well to vertical and inverted surfaces
–

Quick Tips:

  • Measure equal parts of A and B onto a flat board and then mix together into an even colour
  • Apply in even layers for best results
  • Allow 12 hours before sanding
  • If used below the waterline:
    • Prime surface with a layer of epoxy resin
    • Fair or rebuild with epoxy bog
    • Overcoat with epoxy laminating resin
  • Preparing sufaces:
    • Timber: plane/sand, degrease oily species (teak), cross‑hatch with 100‑grit
    • Steel: abrasive blast to sharp profile or sand/wire‑brush to bright metal
    • Aluminium: abrasive blast or use an etch primer
    • GRP: must be fully cured; degrease and sand with 60–100 grit; watch for wax layer
–

Things our customers have used this product for:

  • Window frames and joinery in homes
  • Fairing boat hulls for a smooth finish
  • Filling screw holes and surface defects
  • Shaping and contouring repairs
  • General-purpose fairing on wood, steel, aluminium, fibreglass, and MDF/particle board