Sizes: 750ml | 1.5L | 6L | 30L
Pack Type: 2pk Resin and Hardener
—
Clear epoxy for casting and pouring. This epoxy has a slower cure rate reducing heat build-up so you can pour it to 25mm thick in one application. This makes it perfect for casting, river tables and filling cavities.
—
Features:
- Crystal-clear finish
- UV stabilised to prevent yellowing
- Can be coloured using pigments and dyes
- Hard, durable cured finish
—
Quick Tips:
- Do your math first. At a 25mm pour depth, 6L pack will fill approximately 0.24m2
- Deep pour resin is heavy and epoxy will leak through any gaps. Secure the pour area.
- For pours deeper than 25mm, allow the first pour to firm up before pouring the next layer. This will prevent a line between the layers.
- When setting rocks, shells or insects, paint them with a thin layer of epoxy before pouring. This helps prevent trapped air bubbles.
—
Technical Snapshot:
- Material: Epoxy and Hardener
- Coverage @ 25mm: 0.04m2 per Litre
- Working Temperature: 20-25C
- Mix ratio: 2:1 by volume
- Mix ratio: 100:42 by weight
- Pot-life time: ~2 hours @ 25C
- Cure time: ~48 hours @ 25C
- Brand: NZ Fibreglass
—
A few words on safety:
- Use in well ventilated area with the right PPE including gloves, eye protection and mask.
- Full SDS available upon request.
—
Things our customers have used this product for:
- River tables (for the river part – use our clear epoxy for the finish)
- Filling cavities
- Casting
—
Got questions? Drop by our Fibreglass Shop or give us a call.
