Our breather cloth is a polyester fabric that lets the air/ gas pass and excess resin be absorbed during the vacuum lay-up process. It allows pressure to be applied more evenly across the system.

–

Key Info:

• Technical data:
  • 150GSM
  • 1520mm Wide
  • 3.8mm Thick
  • 100m Long
• Breather cloth goes between your laminate and perforated film.
• Breather cloth is single use as it collects excess resin.

–

Additional Info:

• Our breather cloth can also be purchase by the lineal metre.
• When vacuum bagging wet-lay laminates, breather cloth serves both to provide an air path from the laminate to the vacuum connector and also to act as a bleeder or soaker, absorbing excess resin that is squeezed out of the laminate by the vacuum pressure.