Easy Sanding Polyester Surface Primer – Duratec

Sizes: 900ml | 3.8L
Pack Type: 2pk – Primer and MEKP

—

—

Features:

• Can be polished to a smooth mould-ready finish
• Suitable for MDF, tooling board, plaster, clay, concrete and epoxy surfaces
• Grey so that you can see the product easily

—

Quick Tips:

• Apply with a spray gun using a 2.5mm tip or larger for best results
• Apply multiple coats at tack – if it becomes tack free then you will need to let fully cure before sanding and applying next layer
• Can be thinned using MEK thinners but do not use Acetone or Styrene or Lacquer Thinners

—

Technical Snapshot:

• Material:
• Colour: Light Grey
• Coverage: ~2m2 per litre  at 20 mils (0.5mm) et film thickness
• Catalyst Level: 2% MEKP
• Gel Time 100g@25C: ~22 minutes
• Recommended Spray Tip: 2.5mm+
• Maximum Build: Up to 30 mils (0.75mm)
• Heat Distortion Temperature: 83°C
• Brand: Duratec

—

A few words on safety:

• Use in well ventilated area with the right PPE including gloves, eye protection and mask.

• Full SDS available upon request.

—

Things our customers have used this product for:

• Composite mould preparation
• Plug building
• Fairing and surfacing work

—

Got questions? Drop by our Fibreglass Shop or give us a call.