Our reusable paint spray gun is can be used to spray gelcoat, paint or similar products.  It is gravity fed with a 3mm nozzle and is ready to connect to your air compressor. With a 600ml cup, you can have the right amount of gelcoat without the gun getting too heavy.

–

Key Info:

• Usual air pressure setting should be between 43 and 50 psi (3.0 to 3.5 bar)
  • Spray within 100-150mm metres of the object you are painting / spraying
  • Spray gun should be at a 90 degree angle to the object you are painting/ spraying
  • Move the gun in straight horizontal lines
  • Control the flow of the gelcoat/ paint to ensure an even (and better) finish
• Technical Data
  • Cup Capacity:  600mL
  • Feed Type:  Gravity
  • Fluid Nozzle (mm):  3mm
  • Air Pressure: 3.5bar(50psi)
  • Air Inlet:  G1/4″
  • Air Consumption:  13-22CFM
  • Brand: Machine Works

–

Additional Info:

• This product needs to be connected to an air compressor to work
• STOCK AVAILABLE END OF JAN 2026