Gelcoat - Neutral - NZ Fibreglass

Product

Price range: $29.00 through $300.00

SKU POLY.GC.NEUTRAL Categories Gelcoats & Flowcoats, Uncategorised

Our gelcoat is a polyester resin with fillers and pigment. The fillers allow the gelcoat to spread in an even layer across moulds.

–

Key Info:

Colour: Neutral/ Colourless
Brushing Grade
Polyester (Iso) Based Gelcoat
Comes with MEKP Catalyst
Used in:
- gelcoat repairs
- moulding – use as a first layer
Coverage:
- Applied at 0.5mm 1kg will cover 2m2
  - Note: Usually apply at least 2 coats
Gelcoat dries tacky so that it is ready to fibreglass over the top of
- Use a flowcoat for a hard wax finish

–

Available in:

–

Quick Technical Info:

Mixing Ratio
- Mix in MEKP at a ratio of 1.5%-3%
- Use scales as this ratio is based on weight not volume
Pot-life/ Working Time
- 16-25 minutes (2% MEKP)
Ambient Conditions
- 18-20C
- Gelcoat is made to work between 15C and 30C but working time and curing time changes outside the 18-20C range
Backing up time
- Typically at 2% MEKP the gelcoat can be backed up for the next resin layer after a minimum of two hours curing

–

Additional Info:

Size

Clear