A mould release agent is an important part of getting a clean release of your part from the mould.  Usually used with a Mould Relase Wax, the PVA forms a final film between the mould and the part you are making.  Styrene and solvent resistance – PVA is the release agent you need for your moulding project.

–

Key Info:

• Can be used on its own as a release agent but is better used over the top of Mould Release Wax layers
• Resistant to solvents and styrene
  • but water soluble
• Colour: Green
  • This release agent will set to quite a smooth film
• Coverage:
  • 1L will cover 9.7m2
    • 500ml bottle will cover 4.85m2
    • 3.8L bottle will cover 37m2
    • Notes:
      • Product is applied with 2-3 layers
      • First mist coat will use less product
      • See application notes below
• Can be use with the following resin systems:
  • Polyester resin
  • Vinyl Ester resin
  • Epoxy resin
  • Urethane resin

–

Available in:

• 500mL
• 3.8L