• 09 570 8999
  • 0800 100 098
  • Shop Open: Monday - Thursday 9:00am - 4:00pm
  • Friday 9:00am - 2:00pm
  • Saturday 9:30am - 1:30pm
  • Anzac Day: Closed Monday 27 April
Instagram

Product

Gelcoat - White - Brushing
Gelcoat – White – Brushing

Price range: $30.00 through $360.00 incl GST

SKU POLY.GEL.WHITE.BRUSH Categories ,

Our white gelcoat is a polyester product with fillers and pigment for colouring.  The fillers allow the gelcoat to spread in an even layer across moulds.

–

Key Info:

  • Used as the first layer in your mould
    • Also used in gelcoat repairs
  • Coverage:
    • Applied at 0.5mm 1KG will cover 2 Square Metres
    • Note: 2 coats of gelcoat is the norm
  • Gelcoat dries tacky so that it is ready to fibreglass over the top of
    • Use a flowcoat for a hard wax finish
  • Brushing Grade

–

Available in:

  • 500g
  • 1kg
  • 2kg
  • 4kg
  • 20kg

–

Additional Info:

  • Available in two other colours:
    • Black
    • Natural
  • Also available in SPRAYING GRADE

–

Quick Technical Info:

  • Mixing Ratio
    • Mix in MEKP at a ratio of 1.5%-3%. Use scales as this ratio is based on weight not volume
  • Pot-life/ Working Time
    • 16-25 minutes (2% MEKP)
  • Ambient Conditions
    • 18-20C
    • Gelcoat is made to work between 15C and 30C but working time and curing time changes outside the 18-20C range
  • Backing up time
    • Typically at 2% MEKP the gelcoat can be backed up for the next resin layer after a minimum of two hours curing