Wood Sealer

Sizes: 1L | 2L | 4L | 8L | 40L
Pack Type: Two-pack system (Resin and Hardener)

—

NZF Wood Sealer is a two-pack epoxy system that penetrates deep into timber helping to seal and protect it.  We’ve added a broad spectrum biocide to help protect the wood from moisture ingress, mould and rot.

—

Features:

• Low viscosity (very thin) formula designed to penetrate into wood
• Contains a broad-spectrum biocide to inhibit algal, fungal and yeast growth
• Lightly tinted to bring out the colour of wood

—

Quick Tips:

• Brush on to clean, dry wood
• Allow 24-48 hours between coats and and lightly sand with 120–180 grit paper before recoating.
• Apply 2-3 coats to seal wood

—

Technical Snapshot:

• Mix ratio: 1:1 by volume
• Coverage: Approx. 10m2/L first coat, up to 15m2/L subsequent coats
• Pot-life: 3–4 hours at 20°C (100g mass)
• Working temperature: Above 15C
• Thinning: Up to 10% with epoxy-compatible thinners
• Brand: NZ Fibreglass

—

A few words on safety:

• Use in well ventilated area with the right PPE including gloves, eye protection and mask.
• Full SDS available upon request.

—

Things our customers have used this product for:

• Sealing plywood before fibreglassing
• Sealing wood before topcoating with clear epoxy (river tables, bar leaners, wooden boards etc)
• Timber restoration

—

Got questions? Drop by our Fibreglass Shop or give us a call.